Australia
FS_FC_Fabricated Products_Ribbons 05
FS_FC_Fabricated Products_Ribbons 02
FS_FC_Fabricated Products_Ribbons 04
FS_FC_Fabricated Products_Packaging Ribbons 01

Ribbons


Our ribbons are used in a multitude of applications such as automotive and aerospace filters, household and industrial filters, electronic devices, diagnostic test strips, perfusion and transfusion filters in healthcare.

FS_FC_Fabricated Products_Ribbons 05
Thumbnail Border
FS_FC_Fabricated Products_Ribbons 02
Thumbnail Border
FS_FC_Fabricated Products_Ribbons 04
Thumbnail Border
FS_FC_Fabricated Products_Packaging Ribbons 01
Thumbnail Border

Ribbons

Edges

Single or multilayer fabrics can be heat- or ultrasonically-slit into ribbon form

FS_Production_Fabrication_Heat slit

Heat-slit edge

Welded, closed edges

For all fabric, except PTFE

Width from 7 mm to 3600 mm

FS_Production_Fabrication_Ultrasonic

Ultrasonically slit edge

Closed edge without rim

Width from 4 mm to 700 mm

PA/PP/PET with mesh opening < 280 µm


Making-up

FS_FC_Fabricated Products_Ribbons 03

Ribbons with a width up to 300 mm are wound onto polyester discs with an inner square hole 30 x 30 mm and an outer diameter of 61 mm

Ribbons can also be rolled upon request onto ABS rings with an inner diameter of 76 mm (3")

Ribbons wider than 300 mm are wound onto polystyrene tubes with an inner diameter of 76 mm (3")

Depending on fabric, slitting technology, core and width of the ribbon, rolls can be approximately up to 500m long


Packaging and labeling

FS_FC_Fabricated Products_Packaging Ribbons 01

Ribbons are packed into PE bags which are closed by welding

Ribbons made of SEFAR MEDIFAB fabrics are double bagged

The label contains the following information:

Manufacturer

Material

Dimensions (width in mm, length in meter)

Manufacturing date

Order number

Roll number


For industry/application specific use of ribbons see links below:


Download PDF Factsheet